Data Disclaimer: Water level data is provided by USGS and NOAA for informational purposes only. Verify conditions on-site before any water activities. Learn more
Access Site MD

Put In

Bennett Creek

Source: american_whitewater Updated 3 months ago

City: MD
County: Frederick
Type: Whitewater Put In
Location: 39.31944300, -77.32917000
Air Temp: --
Location
Nearby Gauge Conditions
Whitewater Run
I-II Put-in Bennett Creek - MD Route 355 to Monocacy River
View Run
Current Conditions
-- • 125.00-5000.00 cfs
Bennett Creek at Park Mills, MD
Whitewater Runs on Bennett Creek
1 run
Difficulty Classes
I Easy II Novice III Intermediate IV Advanced V Expert/Extreme VI Unrunnable
Position relative to this access site: Put-in at this location This location is on the run Take-out at this location
Downstream from here Upstream from here
Whitewater data from American Whitewater
About This Access Site
Put In is a whitewater access point on Bennett Creek in Frederick County, Maryland, located in the upper reaches of this medium-sized river system. Bennett Creek is a headwater stream with significant gradient, dropping approximately 3,188 feet over its 33.84-mile course. With an average slope of 94.2 feet per mile and moderate average velocity of 2.0 feet per second, this creek presents whitewater paddling opportunities suitable for intermediate to advanced paddlers. The stream's drainage area of 91 square miles supports an average flow of 19.60 cubic feet per second, which can vary seasonally.

This put-in provides access to upper Bennett Creek's whitewater sections. Paddlers should be prepared for fast-moving water with potential for technical features given the high gradient nature of this headwater stream. Water conditions can change significantly based on recent rainfall and seasonal runoff patterns. The proximity to the creek's upper reaches means paddlers will be navigating relatively narrow channels with natural streambed characteristics typical of headwater systems.