Data Disclaimer: Water level data is provided by USGS and NOAA for informational purposes only. Verify conditions on-site before any water activities. Learn more
Access Site NY

Put In

West Kill

Source: american_whitewater Updated 3 months ago

Sign in to Monitor
City: NY
County: Schoharie
Type: Whitewater Put In
Location: 42.49340000, -74.52590000
Air Temp: --
Location
Get Directions
Nearby Gauge Conditions
West Kill near West Kill NY Same River 19.4 mi away
View Gauge
West Kill below Hunter Brook near Spruceton NY Same River 24.8 mi away
View Gauge
Schoharie Creek at North Blenheim NY 3.8 mi away
View Gauge
Real-time data from USGS Water Services
Whitewater Run
II-III+(IV) Put-in West Kill - Betty Brock junction to Route 30 b
View Run
Current Conditions
-- • 600.00-3000.00 cfs
Schoharie Creek at Breakabeen NY
Whitewater Runs on West Kill
2 runs
Difficulty Classes
I Easy II Novice III Intermediate IV Advanced V Expert/Extreme VI Unrunnable
Position relative to this access site: Put-in at this location This location is on the run Take-out at this location
Downstream from here Upstream from here
II-III+(IV) Put-in at this location Betty Brock junction to Route 30 b
6.1 mi
II-IV Upstream from here (19.9 mi from take-out) Albinos Pizzeria to Schoharie Creek
7.9 mi
Whitewater data from American Whitewater
About This Access Site
Put In is a whitewater access point on West Kill in Schoharie County, New York. As a dedicated put-in site for whitewater paddling, this location provides access to the river for kayakers and canoeists looking to run whitewater sections. West Kill is a tributary in the Catskills region known for offering seasonal whitewater opportunities, particularly during spring runoff and after heavy rainfall when water levels are suitable for paddling.

Paddlers should be aware that conditions on West Kill can vary significantly depending on recent precipitation and season. Water levels and current speed will determine which sections are paddleable and what skill level is required. Those planning to use this put-in should scout conditions beforehand and check current water flow data if available.