Whitewater Run VT Class II-III

1) E. Wallingford to Cuttingsville

Mill River

Linked via: Nhdplus discovery 90% confidence Synced 3mo ago

Monitor
Gauge Conditions
Runnable: ? – ? CFS
Approximate reading: This gauge is 12.2 miles away on Mill River. Use as a general reference only.
Run Map
Description
10/30/03 - 1' on the gauge under the rt. 103 bridge in Cuttingsville, river right. (estimated; gauge goes from 4' - 8'). Another "gauge" is the high RR trestle north of E. Wallingford, river left....water was washing over the footing, but not quite up to the stonework. I ran the 4 miles from just upstream of E. Wallingford down to the bridge a mile downstream of Cuttingsville. First 3 miles were continuous class 2 mixed with lots of bouldery, technical class 3 rapids. Last mile was mostly class 2. The biggest drop is probably the one under the high trestle. Good surfing at the ledges a couple hundred yards above the Cuttingsville bridge. This was good level, but I wouldn't want to run it much lower....it got boney anywhere the riverbed widened out. Another 6" of water would be perfect. Jim Zamecnik Note: Original listing had take-out as 43.509 -72.975, which is quite a few miles west. Modified it to be same as put-in for lower section which seemed more logical.Please send email to the Streamkeepers if you have more info.  - 11/8/17 Streamkeeper 2545
Difficulty
Class II-III
Length
5.8 mi
Rapids
0
Difficulty Classes
I Easy II Novice III Intermediate IV Advanced V Expert/Extreme VI Unrunnable
Current Conditions
5-Day Forecast
Whitewater data from
American Whitewater