Whitewater Run WI Class I-II

B) Brule R. Dam to Ryneers Rd. (3.4 miles)

Brule

Linked via: Nhdplus discovery 90% confidence Synced 3mo ago

Monitor
Gauge Conditions
Runnable: 500.0 – 4,000.0 CFS

Probably moderate flows. (Unconfirmed. We need your input. Add a comment or report regarding best flows.)

Run Map
Run Time Estimate
Select put-in and take-out to estimate time.
Unlock Advanced Trip Planning

See wind-adjusted speed maps, forecast planning, and detailed time estimates.

Sign in to generate an AI timing estimate for this run.
Whitewater timing varies with scouting, portages, and group pace. Use as a planning baseline.
Description
The listed put-in is (indeed) on the Brule River (as this reach is listed). However, the only known actual rapids are after the confluence with Michigamme where the combined flow becomes the Menominee River. Thus, by rights, this really could be the first listing for the Menominee. The main reason to do this reach is Big Bull Rapids. Where the river encounters a large island, rapids reportedly lie on each side. The left channel carries the majority of the flow, and (reportedly) has large waves and some large rocks. The right channel is characterized as having tight turns and being likely to be brush-filled, thus a less likely route (at least by old canoe guide descriptions). We do not currently have information as to whether these rapids (either side) contain sufficient interest or potential for whitewater playboaters to merit the flatwater access and egress which appear to be necessary. Resolution on satellite view is excellent. We highly recommend going to a good mapping app, clicking 'Satellite', and zooming-in on the islands at Big Bull Rapids to have a look. As reported by Brendan Hammond (2010-10-23) _Ran this stretch a few years ago, no real whitewater whatsoever._ _However, way up on the headwaters of the Brule, where Brule Creek flows into Elvoy Creek there is a short section where Brule Creek drops 20'+. There was a hydropower plant and dam at one time there. Some of the penstock is still visible. These creeks start in springs and are largely groundwater-fed. This fact, along with the amount of wood in the larger drops, and the small drainage area, probably makes it a no go._ For what it's worth, it appears drainage at that location is on the order of 33 square miles. In theory, that _could_ be enough to make runnable flows at least a good handful of times a year. However, the nearest downstream gauge (at Hwy.2 near Florence) has 366 sq.mi. drainage, and has a "10% flow" of only 539 cfs. Assuming proportional contribution across the watershed (not necessarily valid), this implies flow up at the Brule Creek/Elvoy Creek area would be less than 54 cfs 90% of the time (>328 days per year).
Difficulty
Class I-II
Length
3.3 mi
Gradient
11 ft/mi
max 17
Rapids
5
Shuttle Info
The most convenient put-in (that is, the put-in which allows the most convenient shuttle) is on the Brule River, just downstream of the dam and powerplant. However, the whitewater on this reach lies about a mile downstream of the confluence of the Brule and the Michigamme Rivers, where the combined flow becomes the Menominee River. ( **IF** access can be arranged on "Camel's Clearing Road" and "Township Road", the flatwater trip (and the shuttle) may be shortened considerably (2 miles of river, 5.5 mile shuttle). (Put-in coordinates become 45.947990, -88.184600) Unfortunately, if memory serves, when I tried looking for this access, all I found was a gated road, necessitating the put-in as listed elsewhere in this description. Access may be possible from the Michigan side of the river at the confluence of the Brule and Michigamme, but this makes for a 27 mile long shuttle for a scant 2 miles of river.)
Difficulty Classes
I Easy II Novice III Intermediate IV Advanced V Expert/Extreme VI Unrunnable
Current Conditions
5-Day Forecast
Whitewater data from
American Whitewater